Guide · Coin Melt Values

How Many Silver Dimes Make an Ounce of Silver?

How Many Silver Dimes Make an Ounce of Silver?

It takes about 14 silver dimes to make one troy ounce of silver. Each 90% silver dime from 1964 or earlier holds 0.07234 troy ounces, so the exact figure is 13.8 new dimes, or very close to 14 worn ones. In face value, that's about $1.40 in dimes for each ounce of silver.

Only Barber (1892–1916), Mercury (1916–1945) and Roosevelt dimes dated 1946 through 1964 count. A dime from 1965 or later is clad and holds no silver at all.

The math behind the number 14

A silver dime weighs 2.50 g and is 90% silver, so it contains 2.25 g of pure silver. Silver is priced in troy ounces of 31.1035 g each.

  • 31.1035 ÷ 2.25 = 13.82 new dimes per troy ounce.
  • Rounded up, 14 dimes contain about 1.013 troy ounces.
  • Rounded down, 13 dimes contain about 0.94 troy ounces.

Worn dimes have lost a sliver of silver over decades in pockets and cash drawers. Dealers figure worn 90% coins at 0.715 troy ounces per $1 face, which is 0.0715 ounces per dime. Divide one ounce by that and you get 13.99, so for a typical circulated pile, 14 dimes is almost exactly one ounce.

That's a handy coincidence. Count out 14 worn dimes, and you're holding about one troy ounce of silver.

Dime counts for common amounts

Silver you wantDimes (worn, 0.0715 ozt each)Face value
1 troy ounce14$1.40
5 troy ounces70$7.00
10 troy ounces140$14.00
50 troy ouncesabout 700about $70
100 troy ouncesabout 1,400about $140

Going the other way is just as useful. A standard bank roll holds 50 dimes, or $5 face. At the worn-coin rate, a full roll of silver dimes contains about 3.575 troy ounces. Two rolls ($10 face) come to about 7.15 ounces.

What an ounce of dimes is worth today

One Roosevelt silver dime is worth about $2.97 in metal at today's price, and silver itself is near $41.07 per troy ounce. Since 14 worn dimes make roughly an ounce, a stack of 14 is worth close to the spot price of one ounce.

Enter any number of dimes below to see their combined silver weight and live melt value.

How much are Roosevelt Dime (silver) coins worth in bulk?

QuantityFace valueMelt value
1$0.10$2.97
5$0.50$14.87
10$1.00$29.74
50 (1 roll)$5.00$148.71
100$10.00$297.43
1,000$100.00$2,974.29

Here's a worked example. Say Janet has a cigar box with 210 silver dimes. That's $21 face. At 0.715 ozt per $1 face, she has about 15 troy ounces. If silver were $40 an ounce, the melt would be about $600. A dealer paying 92% of melt would offer about $552. The count took ten minutes; knowing it gives her a fair yardstick for any offer.

Dimes vs quarters vs halves per ounce

All 90% silver coins hold the same silver per dollar of face, so the only difference is how many pieces you're counting.

CoinSilver per coinCoins per troy ounce
Dime0.07234 oztabout 13.8
Quarter0.18084 oztabout 5.5
Half dollar0.36169 oztabout 2.8

The quarter version of this question has a less tidy answer, which our guide to how many silver quarters make an ounce works through. For every US coin in one place, see the silver content chart.

Why some stackers prefer dimes

Dimes are the smallest unit of 90% silver you can buy or sell easily. That gives them a few practical advantages:

  • Small units. If you ever need to sell or trade a little silver, a handful of dimes is easier to split than a 1 oz bar.
  • Recognizable. A Mercury or Roosevelt dime with a 1964-or-earlier date is easy for any coin shop to identify.
  • Same silver per dollar. You don't give up any silver content by choosing dimes over quarters or halves.

The trade-off is counting. Fourteen coins per ounce adds up fast, and a $1,000 face bag of dimes is 10,000 coins. Premiums on dimes vs other junk silver vary by dealer and market, so compare prices per ounce rather than per coin. Our page on what silver dimes are worth covers dealer pricing in more depth.

Buying an ounce in dimes

If you're on the buying side, the 14-dime rule helps you compare offers. Dealers usually quote junk silver either as a price per $1 face or as a premium over spot per ounce. Convert either one to a price per ounce so you can line it up against a 1 oz round or coin.

Say a shop sells 90% dimes at $30 per $1 face. Since $1 face of worn coins holds 0.715 ounces, that works out to about $41.96 per ounce of silver. If another seller lists $1.40 face (14 dimes) for $42, you now know the two prices are essentially the same. These numbers are only an example; real premiums change with demand.

Mistakes that throw off your count

Mixing in clad dimes

A 1965-or-later dime looks almost identical to a 1964 one. Check every date, or look at the edge for a copper stripe. One clad dime per roll won't wreck your count, but a handful will.

Using kitchen ounces

If you weigh your dimes on a kitchen scale in ordinary ounces, the number will be wrong. A troy ounce is 31.1035 g and an ordinary ounce is 28.3495 g. Weigh in grams and convert. Our explainer on troy vs regular ounces shows why it matters.

Counting total weight instead of silver

A pile of dimes that weighs 31.1 g on the scale is not one ounce of silver. About 10% of each dime is copper. You need the pure silver weight, which is why counting coins is easier than weighing them.

Selling collectible dimes as silver

Most worn dimes trade on metal, but certain Mercury and Barber dates and sharp, uncirculated coins can be worth more. Before you sell a bag by the ounce, check older or unusually crisp coins against a current price guide.

Live melt values for every dime type

This table compares Barber, Mercury and Roosevelt dimes, silver and clad, at current metal prices.

CoinYearsMetal contentMelt value× face
Barber Dime1892–19160.0723 oz silver $2.9729.7×
Mercury Dime1916–19450.0723 oz silver $2.9729.7×
Roosevelt Dime (silver)1946–19640.0723 oz silver $2.9729.7×
Roosevelt Dime (clad)1965–present2.268 g · 91.67% copper $0.02890.3×

Melt value = metal content × today’s spot price. It is not what a dealer pays (usually less) or a collector’s price (often more).

Quick recap

  • About 14 silver dimes make one troy ounce (13.8 new, 14 worn).
  • $1.40 face value of 90% dimes is roughly one ounce.
  • A 50-coin roll holds about 3.575 ounces at the worn rate.
  • Only dimes dated 1964 or earlier count.
  • For bigger piles, the junk silver calculator turns face value into ounces and dollars. If you want the formula behind it, read our coin melt value explainer.

Written by Editorial Team and checked against official sources under our editorial policy. Spotted an error? See our corrections policy.

Frequently asked questions

How much does one silver dime weigh?
A 90% silver dime weighs 2.50 g when new, of which 2.25 g is pure silver, or 0.07234 troy ounces. Worn dimes weigh slightly less. A clad dime from 1965 or later weighs 2.268 g, so a scale reading to 0.01 g can tell them apart.
Are war nickels better than dimes for silver per coin?
No. A war nickel holds 0.05626 troy ounces, less than a dime's 0.07234, so it takes about 17.8 war nickels to make an ounce. Per dollar of face value, though, war nickels hold more silver, because 20 of them cost just $1 face.
Do Mercury dimes contain more silver than Roosevelt dimes?
No. Barber, Mercury and Roosevelt silver dimes were all struck at 2.50 g and 90% silver, so each holds the same 0.07234 troy ounces. The design and date can affect collector value, but the silver content is identical.

More in Coin Melt Values