Guide · Coin Melt Values
What Are Clad Coins? Copper-Nickel Sandwich Coins Explained
Clad coins are US coins made from layers of metal bonded together: copper-nickel outer faces over a copper core. Every dime and quarter since 1965 and every half dollar since 1971 is clad. They contain no silver, and their metal is worth less than face value, so a clad coin is worth its face unless it's a rare variety or error.
The easiest tell is the edge. Look at a clad coin from the side and you'll see a copper-colored stripe.
How a clad coin is built
Picture a sandwich. The two outer slices are a silvery copper-nickel alloy; the filling is copper. Sheets of this layered metal are rolled out and coin blanks are punched from them. Because the punch cuts straight through all three layers, the copper core shows on the edge of every finished coin.
Overall, a clad dime works out to 91.67% copper and 8.33% nickel. It's mostly copper, which surprises people who assume a silvery coin must be made of something silvery all the way through.
Clad coins and their weights
| Coin | Years clad | Clad weight | Old silver weight |
|---|---|---|---|
| Roosevelt dime | 1965– | 2.268 g | 2.50 g |
| Washington quarter (incl. state and park quarters) | 1965– | 5.67 g | 6.25 g |
| Kennedy half dollar | 1971– | 11.34 g | 12.50 g (1964), 11.50 g (1965–70, 40% silver) |
| Eisenhower dollar | 1971–1978 | 22.68 g | 24.59 g (40% silver, collector issues) |
| Susan B. Anthony dollar | 1979–81, 1999 | 8.10 g | never silver |
Every clad coin is lighter than its silver ancestor. A digital scale that reads to 0.01 g will separate them in seconds.
Clad coin myths, checked
"Shiny old quarters are probably silver"
Fact: Shine tells you nothing. A freshly minted clad quarter can look brighter than a worn 1964 silver one. Date and edge are what count: 1964 or earlier with a solid silver edge is silver; 1965 or later with a copper stripe is clad.
"State and park quarters are special silver issues"
Fact: The ones you get in change are clad, exactly like any other modern quarter. The Mint has sold silver versions to collectors in special sets, but those don't circulate. See are state quarters silver? for how to tell.
"The copper in clad coins makes them worth more than face"
Fact: There isn't enough of it. Run a clad dime through the numbers below and the metal comes to a few cents at most.
"Bicentennial coins dated 1776–1976 are all silver"
Fact: Circulation Bicentennial quarters, halves and dollars are clad. Silver versions were made for collectors, such as the 1976-S quarter at 40% silver. Our Bicentennial quarter guide covers the difference.
What's a clad dime's metal actually worth?
Take a clad dime at 2.268 g.
- Copper: 2.268 g × 91.67% = about 2.079 g.
- Nickel: 2.268 g × 8.33% = about 0.189 g.
- Convert to pounds (453.592 g per pound): roughly 0.00458 lb copper and 0.00042 lb nickel.
- Say copper is $5 a pound and nickel $8 a pound, as round example figures. That's about 2.3 cents of copper plus 0.3 cents of nickel.
Total: roughly 2.6 cents of metal in a 10-cent coin. Even if base metal prices doubled, the dime would stay under face. That's exactly the point of clad coinage: it's never worth hoarding for the metal.
The live coin card shows the same calculation at today's copper and nickel prices.
Coins that look clad but aren't
A few coins sit in the gray zone and trip people up.
- Kennedy halves from 1965 to 1970. These are 40% silver overall, weigh 11.50 g and hold 0.14792 troy ounces of silver. They're easy to toss in with clad halves by mistake, so check the date on every Kennedy.
- 40% silver Eisenhower dollars. The S-mint collector versions weigh 24.59 g against 22.68 g for clad Ikes.
- The 1976-S silver quarter. At 5.75 g it's only slightly heavier than a 5.67 g clad quarter, so you'll need a precise scale.
When the edge is hard to read, weight is the more reliable test.
How to sort clad from silver in a pile of change
- Edge first. Stack the coins and look at the side of the stack. Copper stripes jump out; a solid silver-colored edge stands out among them.
- Date second. Dimes and quarters 1964 or earlier, halves 1970 or earlier. Remember 1965–1970 halves are 40% silver, not clad.
- Weigh anything doubtful. Compare against the weights in the table above.
- Don't scratch or file. Damaging a coin to check it can wreck any collector value it had.
The full set of tests, including the ring test and magnet, is in how to tell if a coin is silver.
For a side-by-side of today's melt values across the main clad coins, check the table below.
| Coin | Years | Metal content | Melt value | × face |
|---|---|---|---|---|
| 1965–present | 5.67 g · 91.67% copper | $0.0721 | 0.3× | |
| 1971–present | 11.34 g · 91.67% copper | $0.1443 | 0.3× | |
| 1971–1978 | 22.68 g · 91.67% copper | $0.2885 | 0.3× | |
| 1979–1981, 1999 | 8.1 g · 87.5% copper | $0.1044 | 0.1× |
Melt value = metal content × today’s spot price. It is not what a dealer pays (usually less) or a collector’s price (often more).
Clad coins in short
- Clad = copper-nickel layers over a copper core, with no silver.
- Dimes and quarters from 1965 and halves from 1971 are clad.
- The copper stripe on the edge gives them away.
- Metal value sits below face; collector value only for rare varieties or errors, which you should confirm in a current price guide.
Curious why the Mint switched in the first place? Read why US coins aren't silver anymore, or start with how coin melt value is calculated. Silver Kennedy halves are covered in detail in which Kennedy halves are silver, and you can track base metals on our live copper price page.
Written by Editorial Team and checked against official sources under our editorial policy. Spotted an error? See our corrections policy.