Guide · Coin Melt Values
How to Use a Coin Melt Value Calculator (With Examples)
A melt value calculator multiplies a coin's official weight by its metal content and today's spot price, so you don't have to. Pick the coin, enter how many you have, and it shows the metal value; add a payout percentage and it also shows what a dealer offer at that share of melt would come to. The only thing you need to get right is identifying the coin.
Here's how to use ours step by step, how to handle a mixed pile, and the input mistakes that throw the numbers off.
First, identify exactly what you have
The calculator is only as good as the coin you select. Before you type anything, sort your coins into groups by type and silver content. Date matters more than design.
- Dimes, quarters and halves dated 1964 or earlier: 90% silver.
- Kennedy halves dated 1965 through 1970: 40% silver.
- Nickels dated 1942–1945 with a large mint mark above Monticello: 35% silver war nickels.
- Pennies 1982 and earlier: mostly copper (check 1982 carefully, since both copper and zinc were made that year).
- Everything later: clad or zinc, worth face in metal.
Not sure which bucket a coin belongs in? Check the edge: a copper stripe means clad, a solid silver-colored edge means 90% silver.
Next, enter the coin and how many you have
Choose the coin type from the list, then enter the number of coins, not their face value. Twenty silver quarters means 20, not $5. The calculator already knows each coin's weight and fineness from official Mint specifications and applies the live spot price.
Here's the calculator itself. Try one coin type first so you can see how the result changes as you edit the quantity.
Coin melt value calculator
Pick each coin and how many you have. Values update with the live spot price.
Then set a payout percentage, if you want one
Melt value is the full value of the metal at spot. Dealers buying coins for their metal usually pay a percentage of melt, below 100%, because they have to cover costs and resell. Entering a payout percentage turns the melt figure into an estimate of a realistic offer.
The right percentage varies by dealer, coin type and quantity, so there's no single correct number. A sensible approach is to leave it at 100% to see the ceiling, then compare actual offers you get against that ceiling. Our explainer on how coin dealers price coins covers bid, ask and spread.
A worked example with a mixed estate jar
Say you've sorted a jar and found 12 Mercury dimes, 8 silver Washington quarters, 3 Franklin halves and 1 Morgan dollar. Add each as its own line.
| Coins | Silver per coin (ozt) | Silver total (ozt) |
|---|---|---|
| 12 Mercury dimes | 0.07234 | 0.868 |
| 8 Washington quarters | 0.18084 | 1.447 |
| 3 Franklin halves | 0.36169 | 1.085 |
| 1 Morgan dollar | 0.77344 | 0.773 |
| Total | 4.173 |
With silver at an example price of $40 an ounce, 4.173 ozt × $40 = about $167 in melt value.
Now say a buyer offers $140. Divide the offer by the melt: $140 ÷ $167 is about 84% of melt. That number is what you compare between buyers. If a second shop offers $150, that's about 90%, and you know exactly how much better it is.
One caution on this jar: a Morgan dollar, and sometimes a Mercury dime, can be worth more to a collector than its silver. Check dates and mint marks before selling them as bullion.
Pricing junk silver by face value instead
If you have a lot of 90% coins, counting each type separately gets tedious. The junk silver calculator lets you enter total face value instead. $1 face of 90% silver holds 0.7234 ozt when new, and dealers often use 0.715 ozt for worn coins. Use it for a coffee can of mixed silver dimes and quarters.
Junk silver calculator
Enter the total face value of each group of coins (e.g. 10 silver dimes = $1.00).
Silver spot: $41.07/oz. Dealers pay a percentage of melt that changes with demand – call two or three for quotes.
Wear makes a small but real difference on big lots. The guide on how wear affects melt value shows when to care about it.
Common input mistakes
Entering face value where it asks for a count
A roll of quarters is 40 coins and $10 face. Typing 10 into a coin-count box undercounts by 30 coins.
Picking the wrong Kennedy half
The 1964 Kennedy is 90% silver with 0.36169 ozt. The 1965–1970 halves are 40% with 0.14792 ozt. Mixing them up overstates or understates value by more than double.
Weighing coins and entering the gross weight as silver
If you use a bullion calculator with a weight field, remember that a 90% coin is 10% copper. Enter the coin type, not its gross weight, or multiply by fineness first. Our actual silver weight explainer walks through the arithmetic.
Counting clad coins
Clad quarters and dimes add nothing to silver melt. A copper stripe on the edge means leave them out.
Expecting the melt figure as a sale price
Melt is a reference point. Selling usually happens below it, and buying above it.
Treating penny and nickel melt as cash
The calculator will happily show the copper value of a can of 1970s pennies, and it can be more than face. That figure is useful for deciding what to keep. It isn't money you can collect at a refinery: federal rules prohibit melting or exporting cents and 5-cent coins outside narrow exceptions, so you'd sell them as coins instead. Silver war nickels are the exception. See the rules on melting pennies and nickels.
Before you head to the coin shop
- Sort by type and date, and set aside anything that looks scarce or unusual.
- Run each group through the calculator and write down the total ounces and melt figure.
- Note the time; spot moves through the trading day, so recheck right before you sell.
- Turn every offer into a percentage of melt and compare.
- Keep a record of what you sold and for how much.
Want to know exactly where the numbers come from? Our page on how we calculate melt values lists the sources and formulas. For the concept behind it all, see what coin melt value is, and when you're ready to sell, read how to sell junk silver for the best price.
Written by Editorial Team and checked against official sources under our editorial policy. Spotted an error? See our corrections policy.