Guide · Selling & Buying Coins
Check Before You Sell for Melt: Coins That Are Often Worth More
Key date coins are the scarce dates and mint marks in a series, and they can be worth far more than their metal. Before you sell any old coin for melt, check four things: the date, the mint mark, the condition and whether it's an error or special collector issue. A few minutes with a current price guide can stop a valuable coin from being sold by the ounce.
Most old silver and copper coins really are common and trade near melt. The point of checking isn't to expect a jackpot. It's to make sure the rare one doesn't slip through with the rest.
Why selling for melt can be a costly mistake
Melt value is a floor. It's what the metal is worth if the coin is treated as raw silver, gold or copper. Collectible coins can be worth far more than melt, and once a dealer drops a scarce coin into a bag of junk silver, that premium is gone for you.
Here's why the stakes are uneven. If you check a coin and it turns out to be common, you've lost a minute. If you skip the check and it was scarce, you may have lost the most valuable coin in the box. Our guide to melt value vs numismatic value explains the two kinds of worth in detail.
One legal note for pennies and nickels: melting US 1-cent and 5-cent coins is prohibited except in limited cases, while the 1942–1945 silver war nickels are exempt. Read our guide on whether it's illegal to melt pennies before doing anything with copper cents.
The five things that make a coin worth more than melt
1. A scarce date
Some years the Mint struck far fewer coins of a type than usual. Fewer coins made usually means fewer survivors today, and collectors pay up to complete their sets. Mintage figures for every date are listed in standard price guides, so look up your date rather than guessing.
2. The mint mark
The same date can be common from one mint and scarce from another. Mint marks you'll see on US coins include P (Philadelphia), D (Denver), S (San Francisco), W (West Point), and the historic CC (Carson City) and O (New Orleans). Coins from mints that no longer operate always deserve a price-guide check. If you're not sure where to look on your coin, our guide to finding and reading mint marks shows the spot for each series.
3. Condition
A common date in sharp, uncirculated condition can be worth well above melt, while the same coin worn smooth sells for metal. Condition is often the biggest single factor, and even a small difference in wear on the high points of the design can move a coin up or down a grade.
4. Errors and varieties
Doubled lettering, off-center strikes and coins struck on the wrong metal can carry big premiums. The best-known example is the 1943 bronze cent. Regular 1943 cents were zinc-coated steel and stick to a magnet, and a genuine copper-colored 1943 cent is a famous rare error. Most are fakes, so get one authenticated. See our guide to error coins for what else to look for.
5. Collector issues and packaging
Proof coins, mint sets and special silver issues were made for collectors, not pockets. The 1976-S 40% silver Bicentennial quarter and the 40% silver Eisenhower dollars with an S mint mark are collector-only pieces. Leave any coin in its original mint packaging or grading holder until someone has priced it.
Coin-by-coin: what to check before you sell
Use this table as a sorting guide. The middle column is the metal anchor, which is the floor. The right column is what to look up before accepting a melt offer.
| If you have | Metal anchor | Check before selling for melt |
|---|---|---|
| Wheat cents (1909–1958) | 95% copper, 3.11 g | Early dates, S and D mint marks, any 1943 cent that isn't magnetic |
| Indian Head and Flying Eagle cents | Bronze or copper-nickel | Every date; condition matters a lot |
| Buffalo and older nickels | 75% copper, 25% nickel | Date legibility, mint mark, condition |
| War nickels (1942–1945) | 0.05626 ozt silver | Condition and mint mark above Monticello |
| Barber, Mercury, Roosevelt dimes | 0.07234 ozt silver | Barber and Mercury dates, sharp uncirculated pieces |
| Barber, Standing Liberty, Washington quarters | 0.18084 ozt silver | Older series dates and mint marks, high-grade coins |
| Silver half dollars | 0.36169 ozt silver (90%) | Barber and Walking Liberty dates, condition |
| Morgan, Peace, Trade dollars | 0.77344 to 0.7874 ozt silver | Mint marks (especially CC and O), condition, every Trade dollar |
| Pre-1933 US gold | 0.04837 to 0.9675 ozt gold | Date, mint mark and grade, since many trade above melt |
Silver dollars are where this matters most often, because they're the coins people inherit in rolls and tubes. Here are the metal values for the three classic types at today's price.
| Coin | Years | Metal content | Melt value | × face |
|---|---|---|---|---|
| 1878–1904, 1921 | 0.7735 oz silver | $31.80 | 31.8× | |
| 1921–1935 | 0.7735 oz silver | $31.80 | 31.8× | |
| 1873–1885 | 0.7876 oz silver | $32.38 | 32.4× |
Melt value = metal content × today’s spot price. It is not what a dealer pays (usually less) or a collector’s price (often more).
Worked example: 20 Morgan dollars from Grandpa's tube
Ray finds a 20-coin tube of Morgan dollars. Each Morgan silver dollar holds 0.77344 troy ounces of silver, so the tube holds about 15.5 ounces. Say silver is $40 an ounce for this example: that's roughly $619 of silver, and a dealer buying for metal would pay some percentage below that.
Ray spends fifteen minutes before selling:
- He lists each coin's date and mint mark (on Morgans, it's on the reverse, below the wreath).
- He sets aside any CC or O coins and any that look unworn.
- He looks up those dates in a current price guide.
- He gets two dealer quotes on the set-aside coins separately from the rest.
Most of his coins may still sell close to metal value. But if even one turns out to be a scarce date in good condition, those fifteen minutes paid better than anything else he did that week. Values for specific dates change with the market, so rely on a current guide or a reputable dealer rather than any number you read years ago.
A fast sorting method for a big box of coins
- Separate by type. Cents, nickels, dimes, quarters, halves, dollars, gold.
- Separate by metal. Silver coins have a solid silver-colored edge; clad coins show a copper stripe.
- Pull anything unusual. Oldest dates, unfamiliar designs, mint marks you rarely see, doubled-looking lettering, odd colors.
- Pull anything that looks new. Full shine and no wear on the high points.
- Leave packaging alone. Proof sets, mint sets and graded coins stay sealed.
- Look up the pulled coins in a current guide. Our explainer on how to read coin price guides helps here.
- Price the rest as metal using our coin melt value calculator.
Mistakes that turn a key date into melt
- Cleaning the coins first. Polishing or dipping often destroys collector value. Leave them as found.
- Selling by weight without looking. Bulk offers are fine for common coins, not for unsorted boxes.
- Trusting one opinion. Get a second quote on anything that might be scarce.
- Believing online asking prices. Listings show what sellers hope for, not what coins sell for.
- Ignoring fakes. Altered dates and added mint marks exist, especially on famous rarities. Valuable-looking coins deserve authentication.
Before-you-sell checklist
- Sorted by type and metal?
- Dates and mint marks noted for older coins?
- Unworn, unusual and error-looking coins set aside?
- Pulled coins checked in a current price guide?
- Melt value calculated for the rest?
- Two or more quotes for anything above melt?
When you're ready, our main guide on how to sell old coins for fair value walks through choosing a buyer.
Written by Editorial Team and checked against official sources under our editorial policy. Spotted an error? See our corrections policy.