Guide · Coin Melt Values

1964 vs 1965 Quarters: How to Spot the Silver One

1964 vs 1965 Quarters: How to Spot the Silver One

A 1964 Washington quarter is 90% silver and weighs 6.25 g; a 1965 quarter is copper-nickel clad and weighs 5.67 g. The quickest way to tell them apart is the edge: a 1964 quarter has a solid silver-colored edge, while a 1965 quarter shows a copper stripe. The front and back designs are essentially the same, so the date and edge do all the work.

That small change in metal makes a big difference in value. A 1964 quarter holds 0.18084 troy ounces of silver, worth about $7.44 at today's price. A normal 1965 quarter is worth 25 cents.

Side by side

1964 quarter1965 quarter
Composition90% silver, 10% copperCopper-nickel clad over a copper core
Weight6.25 g5.67 g
EdgeSolid silver-grayCopper stripe
Pure silver0.18084 ozt (5.625 g)None
Typical valueMelt value or moreFace value (25 cents)
Tone when oldOften gray, brown or tonedOften duller, with copper showing at the edge

The live table below puts a 1964 silver quarter next to a clad Washington quarter so you can see the melt gap at current prices.

CoinYearsMetal contentMelt value× face
Washington Quarter (silver)1932–19640.1808 oz silver $7.4429.7×
Washington Quarter (clad)1965–present5.67 g · 91.67% copper $0.07210.3×

Melt value = metal content × today’s spot price. It is not what a dealer pays (usually less) or a collector’s price (often more).

Why 1965 changed everything

The Coinage Act of 1965 removed silver from dimes and quarters and cut the half dollar to 40% silver. Starting with 1965, quarters were made from layers of copper-nickel bonded to a copper core, which is why you can see that copper sandwich when you look at the rim.

So 1964 is the last year of 90% silver Washington quarters, and every Washington quarter from 1932 through 1964 shares the same 6.25 g, 90% silver spec. For the bigger story of why the US took silver out of its coins, see why US coins aren't silver anymore.

How to check a quarter in under a minute

  1. Read the date. 1964 or earlier means silver. 1965 or later means clad for normal circulation coins. If the date is worn flat, move on to the edge.
  2. Look at the edge. Hold the quarter edge-on under good light. A copper-colored band running around the middle means clad.
  3. Weigh it if you're unsure. A digital scale reading to 0.01 g settles it. Silver lands near 6.25 g (a worn coin might be a little lighter); clad lands near 5.67 g.
  4. Listen, if you like. Silver quarters tend to give a brighter ring when tapped, though this is a hint, not proof.

Our full guide on how to tell if a coin is silver covers magnets, ice and other tests for coins that aren't quarters.

Myth vs fact

"All 1965 quarters are worthless."

Not quite. A normal 1965 quarter is worth face value as metal, but any coin can have collector value if it's an error or in exceptional condition. That's for a price guide or grading service to judge, not a melt chart.

"A 1965 quarter on a silver blank would be worth a fortune."

Wrong-metal coins from transition years are a known category of error that collectors look for. If you find a 1965 quarter that weighs close to 6.25 g and has no copper stripe, don't clean it or try to test it with chemicals. Have it authenticated by a reputable grading service. Our error coins primer explains what to look for.

"Shiny quarters are newer, dull ones are silver."

Brightness tells you nothing reliable. Silver tones gray, brown or even black over decades, and clad quarters can also go dull. Trust the date, edge and weight.

"Bicentennial quarters are silver."

Quarters dated 1776–1976 from circulation are clad. Only the 1976-S collector version is 40% silver, and it holds 0.07398 ozt, far less than a 1964 quarter.

What your 1964 quarters are worth in silver

Every 1964 quarter holds the same silver, so value scales with the count. Four quarters ($1 face) hold 0.7234 troy ounces new, or about 0.715 ounces if worn, which is what dealers usually assume.

Worked example: say Luis pulls 16 silver quarters ($4 face) out of a jar of mixed change. Using the worn-coin convention, that's 4 × 0.715 = 2.86 troy ounces. If silver were $40 an ounce, the melt would be about $114. A dealer paying 90% of melt would offer roughly $103.

The card below shows the live melt value and specs for a single 1964-type quarter.

Most worn 1964 quarters trade on their silver. Sharp, uncirculated coins and certain mint marks can carry a premium, so check a current price guide before selling a nice one. For pricing on a larger stack, our guide on what silver quarters are worth covers dealer offers and rolls.

Checking a whole roll at once

If you're searching bank rolls, you don't need to read 40 dates. Hold the roll on its side, or fan the coins out on a towel, and scan the edges. A silver quarter shows up as a plain gray band among a row of copper stripes.

Pull anything without a stripe, then confirm the date. Anything dated 1964 or earlier goes in the silver pile. Anything dated later goes on the scale, because a 1965-or-later quarter with a silver edge is either a misread or something worth a closer look.

A $10 roll of 40 quarters that turned out to be all silver would hold about 7.2 troy ounces. You'll rarely see that from a bank today, which is exactly why a single silver quarter in a roll is a nice find. For tips on getting rolls and what turns up, see coin roll hunting basics.

Where else to look for silver quarters

The 1964 vs 1965 split is the line people remember, but every Washington quarter from 1932 to 1964 is silver, and so are the older Standing Liberty (1916–1930) and Barber (1892–1916) designs. If your jar has any of those, they belong in the silver pile too.

The same 1964 cutoff applies to dimes. Halves are different, with 40% silver Kennedys running from 1965 through 1970. A year-by-year silver cheat sheet covers each one, and the same edge test works on dimes.

Your quarter-sorting checklist

  • Date 1964 or earlier: silver pile.
  • Date 1965 or later with a copper edge: spend it.
  • Worn date: check the edge, then weigh it.
  • A 1965-or-later quarter that weighs like silver: set it aside for authentication.
  • Know the melt value before selling. Our explainer on how coin melt value works shows the formula.

Written by Editorial Team and checked against official sources under our editorial policy. Spotted an error? See our corrections policy.

Frequently asked questions

Is a 1964-D quarter silver too?
Yes. Every regular Washington quarter dated 1964 is 90% silver, whether it was struck in Philadelphia or Denver. The mint mark doesn't change the metal. It can affect collector value for coins in top condition, so check a price guide if your coin looks uncirculated.
Can a bank tell me if my quarter is silver?
A bank teller will simply accept it as 25 cents and won't test it. To confirm silver, use the date, edge and a 0.01 g scale yourself, or ask a local coin shop. Some shops will glance at a few coins while you wait, so ask before you go.
How many 1964 quarters do I need for $100 of silver?
It depends on the silver price, since each quarter holds 0.18084 troy ounces. Divide $100 by the melt value of one silver quarter at today's price to get the count. Our live melt value tools do the math for you whenever prices move.

More in Coin Melt Values